F065
Тышкы торбаның номиналь диаметры:
- HL криоген җиһазларының предприятие стандарты тарафыннан тәкъдим ителә. Шулай ук ул заказ бирүченең таләпләренә туры китереп җитештерелергә мөмкин.
- Дизайн басымы:
- Тәкъдим ителә ≤ 16 бар. Яки "Электр белән тоташтыру төре"н сайлый (≤40 бар).
- Тышкы торба материалы
Махсус таләп булмаганда, эчке һәм тышкы торба материалы бер үк сайланачак.
3.1.3 Эретеп ябыштыру тоташтыру төре
модель
Тоташу
Төре
Эчке торбаның номиналь диаметры
Дизайн басымы
Материал
Эчке торбаның
Стандарт
Искәрмә
W010
00X
Статик вакуум изоляцияләнгән сыгылмалы шланг өчен эретеп ябыштырылган тоташтыру төре
DN10, 3/8"
8~40 бар
300 серияле дат басмас корыч
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Тышкы торбаның номиналь диаметры: | |
| Дизайн басымы | Эчке торба материалы. | А - 304, | DN40, 1-1/2" | C 316 га тигез, |
| D 316 л, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Дизайн басымы |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Тәкъдим ителә ≤ DN25 яки 1" яки вакуум штык тоташтыру тибын фланецлар һәм болтлар белән (DN10, 3/8" дән DN80 гә кадәр, 3"), эретеп ябыштыру тоташтыру тибын (DN10, 3/8" дән DN150 гә кадәр, 6") сайлый. | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Стандарт | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Тышкы торбаның номиналь диаметры: |
| HL криоген җиһазларының предприятие стандарты тарафыннан тәкъдим ителә. Шулай ук ул заказ бирүченең таләпләренә туры китереп җитештерелергә мөмкин. | Тышкы торба материалы | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Төре | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Стандарт | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Дизайн басымы. | / | DN25, 1" | DN25, 1" | / | |
| Эчке торба материалы. | / | DN25, 1" | DN25, 1" | / | |
| C 316 га тигез, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Эчке торбаның номиналь диаметры:
| Тәкъдим ителә ≤ DN25 яки 1" яки вакуум штык тоташтыру тибын фланецлар һәм болтлар белән (DN10, 3/8" дән DN80 гә кадәр, 3"), эретеп ябыштыру тоташтыру тибын (DN10, 3/8" дән DN150 гә кадәр, 6") сайлый. | Тышкы торбаның номиналь диаметры: |
| HL криоген җиһазларының предприятие стандарты тарафыннан тәкъдим ителә. Шулай ук ул заказ бирүченең таләпләренә туры китереп җитештерелергә мөмкин. | Дизайн басымы: |
| Тәкъдим ителә ≤ 16 бар. Яки эретеп ябыштыру тоташтыру төрен сайлый (≤40 бар) | Тышкы торба материалыМахсус таләп булмаганда, эчке һәм тышкы торба материалы бер үк сайланачак.3.2 Динамик вакуум изоляцияләнгән торба системасы3/S |
| 3.2.1 Вакуум штыклы тоташтыру төре, кыскычлар белән | модель |
| Тоташу | Төре |
| Эчке торбаның номиналь диаметры | Дизайн басымы |
| Материал | Эчке торбаның |
| Стандарт | Искәрмә |
HDB01008
Динамик вакуум изоляцияләнгән сыгылмалы шланг өчен кыскычлар белән вакуум штык тоташтыру төре
lDN10, 3/8"
l8 бар
| 300 серияле дат басмас корыч C 316 га тигез, | Эчке торба материалы. | |
| А - 304, | B 304L,C 316 га тигез,D 316 л, | |
| E башка. | HLH | DB01508 |
| DN15, 1/2" | Дизайн басымы: | Дизайн басымы: |
| DN20, 3/4" | Дизайн басымы: | Дизайн басымы: |
| DN25, 1" | Дизайн басымы: | Дизайн басымы: |
| Тышкы торбаның номиналь диаметры: | Дизайн басымы: | Дизайн басымы: |
Тәкъдим ителә ≤ 8 бар. Яисә фланецлар һәм болтлар белән вакуум штык тоташтыру төрен (≤16 бар), эретеп ябыштырылган тоташтыру төрен (≤40 бар) сайлый.Тышкы торба материалыМахсус таләп булмаганда, эчке һәм тышкы торба материалы бер үк сайланачак.
Көч торышы:
HL-HX-X-Участок вакуум насосларына электр энергиясе бирергә һәм HL Cryogenic Equipment компаниясенә җирле электр энергиясе турында мәгълүмат (көчәнеш һәм Герц) бирергә тиеш.-00-X
3.2.2 Вакуум штык тоташтыру төре, фланецлар һәм болтлар белән
модель
Тоташу
Төре
Эчке торбаның номиналь диаметры
Дизайн басымы
Материал
Эчке торбаның
Стандарт
Искәрмә
Nominal Diameter of Inner Pipe
00X
8~16 бар
DN10, 3/8"
8~16 бар
300 серияле дат басмас корыч
Design Pressure
Дизайн басымы.
08 - 8 бар,
16 - 16 бар.
Эчке торба материалы.
А - 304,
B 304L,
C 316 га тигез,
D 316 л,
E башка.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Вакуум изоляцияләнгән фаза аергыч сериясе | DN10, 3/8" | Әрмән
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФранцузчаТышкы торбаның номиналь диаметры:X | DN15, 1/2" | |||||
| ФранцузчаТәкъдим ителә ≤ 16 бар. Яки "Электр белән тоташтыру төре"н сайлый (≤40 бар).X | DN20, 3/4" | |||||
| ФранцузчаКөч торышы:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Исландия
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Французча08 - 8 бар,00X | һәм 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФранцузчаСамоача00X | DN15, 1/2" | |||||
| ФранцузчаСиндхи00X | DN20, 3/4" | |||||
| ФранцузчаТаҗик00X | DN25, 1" | |||||
| ФранцузчаТай00X | DN32, 1-1/4" | |||||
| ФранцузчаҮзбәк00X | DN40, 1-1/2" | |||||
| ФранцузчаКосача00X | DN50, 2" | |||||
| ФранцузчаЗулу00X | DN65, 2-1/2" | |||||
| ФранцузчаОрия00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Көч торышы:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | 300 серияле дат басмас корыч | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФранцузчаDN15, 1/2"00X | DN15, 1/2" | |||||
| ФранцузчаDN20, 3/4"00X | DN20, 3/4" | |||||
| ФранцузчаDN25, 1"00X | DN25, 1" | |||||
| ФранцузчаW03200X | DN32, 1-1/4" | |||||
| ФранцузчаW04000X | DN40, 1-1/2" | |||||
| ФранцузчаW05000X | DN50, 2" | |||||
| ФранцузчаW06500X | DN65, 2-1/2" | |||||
| ФранцузчаW08000X | DN80, 3" | |||||
| HВакуум куртка шлангы00X | DN100, 4" | |||||
| HКытай сыек кислород агымын көйләүче клапан00X | DN125, 5" | |||||
| HКүпләп сату бәясе Кытай Кытай ISO стандарты 2 бак...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSДинамик вакуум насосы системасы00X | Вакуум изоляцияләнгән фаза аергыч сериясе | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ФранцузчаWhatsapp00X | DN15, 1/2" | |||||
| ФранцузчаWeChat00X | DN20, 3/4" | |||||
| ФранцузчаАлман00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Грек
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Дания
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLЛаосX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Әрмән
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHЭстонX | DN15, 1/2" | |||||
| HLHФризX | DN20, 3/4" | |||||
| HLHГуджаратиX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Исландия
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLМалаялам00X | Маори | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDСамоача00X | DN15, 1/2" | |||||
| HLHDСиндхи00X | DN20, 3/4" | |||||
| HLHDТаҗик00X | DN25, 1" | |||||
| HLHDТай00X | DN32, 1-1/4" | |||||
| HLHDҮзбәк00X | DN40, 1-1/2" | |||||
| HLHDКосача00X | DN50, 2" | |||||
| HLHDЗулу00X | DN65, 2-1/2" | |||||
| HLHDОрия00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
